Scrap
Specifications
Specifications
#1 Copper: Completely clean– NO paint, rubber, soldier, metal, or brass. Must be
as thick as a pencil tip & be shiny. If the copper is braided it must be thicker than a
pencil.
#2 Copper: This copper can have a portion of paint and or brass
#1 Iron Prepared: Must be 1/4 in. or thicker and under 2’ x 5’ long.
#2 Iron Prepared: Under 1/4 in. thickness and less than 2’ x 5’ long.
Cars: “MUST HAVE TITLE”!! Gas tanks must be removed.
Tin/Appliances: Freon must be removed & tagged
Extrusion: Pressed molding (A)-door and window frames
New Clip: NEW! Aluminum-thicker than siding (A)
Old Clip: USED! Aluminum without contaminants (A)
Painted Clip: Thicker than siding with paint (A)
Wheels: NO! Lead Weight & NO! Valve Stem
Siding: NO! Tar, steel screws, nails, and staples
Cans: Crushed or Un-Crushed
Cast: (Clean Trainees and Bar B Q tops)
Sheet: Lowest grade-aluminum with grease, oil or rubber that can’t be taken off
Dirty Aluminum: With metal, rubber, or plastic where the percent of aluminum is 5%
-10%.
Irony Aluminum: Where the percent of metal is more than aluminum
(trainees and aluminum motor blocks)
as thick as a pencil tip & be shiny. If the copper is braided it must be thicker than a
pencil.
#2 Copper: This copper can have a portion of paint and or brass
#1 Iron Prepared: Must be 1/4 in. or thicker and under 2’ x 5’ long.
#2 Iron Prepared: Under 1/4 in. thickness and less than 2’ x 5’ long.
Cars: “MUST HAVE TITLE”!! Gas tanks must be removed.
Tin/Appliances: Freon must be removed & tagged
Extrusion: Pressed molding (A)-door and window frames
New Clip: NEW! Aluminum-thicker than siding (A)
Old Clip: USED! Aluminum without contaminants (A)
Painted Clip: Thicker than siding with paint (A)
Wheels: NO! Lead Weight & NO! Valve Stem
Siding: NO! Tar, steel screws, nails, and staples
Cans: Crushed or Un-Crushed
Cast: (Clean Trainees and Bar B Q tops)
Sheet: Lowest grade-aluminum with grease, oil or rubber that can’t be taken off
Dirty Aluminum: With metal, rubber, or plastic where the percent of aluminum is 5%
-10%.
Irony Aluminum: Where the percent of metal is more than aluminum
(trainees and aluminum motor blocks)
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |